Labels by Sign and Label Printer
menu
Paint Stripe Floor Marking Stencils
Valve Lockouts & Hose Lockouts
Safety and Facility Signs and Labels Software
Wire and Component Label Software
Product Identification Label Software
Lockout Tagout Procedures and Tags
SmartID Aerospace RFID Solutions
- Confined Space Signs
- Construction Site Signs
- Electrical and Arc Flash Signs
- First Aid Signs
- Forklift and Warehouse Safety Signs
- Lockout Tagout Signs
- Machine Operation Signs
- Maintenance Signs
- Marine and IMO Signs
- Personal Protection (PPE) Signs
- Radiation and Laser Signs
- Safety Awareness and Compliance Signs
- Slip, Trip and Floor Obstacle Hazard Signs
- Blank Pipe Markers
- IIAR Ammonia Pipe Markers and Components
- Pipe Markers for Acids and Bases
- Pipe Markers for Air and Ducts
- Pipe Markers for Fire Systems
- Pipe Markers for Gases
- Pipe Markers for Maintenance and Operation
- Pipe Markers for Oil
- Pipe Markers for Other Liquids
- Pipe Markers for Steam
- Pipe Markers for Water
Pipe Marker Accessories & Mounting Brackets
Maintenance and Production Tags
Aerospace, Defense and Mass Transit
Datacom , Telecom Identification
Product spotlight: heat-shrinkable wire identification
Finding long-lasting, heat-shrinkable wire identification that is flame-retardant and can withstand extreme temperatures can be a challenge. Brady B-342 PermaSleeve™ Markers are 3:1 heat shrinkable sleeves that fit snugly around wires for maximum insulation protection and permanent identification.
These markers are fade-resistant and smudge-proof, ensuring a superior aesthetic appearance.
Technical Data Sheet: B-342 Permasleeve Marker
Key performance attributes:
Meets the material and physical property requirements of SAE AMSDTL23053/5C (Class 1) for Insulation Sleeving and SAE AS81531 for Marking of Electrical Insulating Materials when printed with R6600, R4300, R4502S, R6700 Series thermal transfer ribbons and R5000 Series dot matrix.
Print Adherence per SAE AS81531 (Sec 3.4.2)
Samples tested after unrestricted shrink at 200°C for three minutes followed by 20 eraser rubs with hard hand pressure. Print is still easily legible on sleeves printed with all ribbons.
Solvent Resistance per SAE AS81531 (Sec 3.4.3)
Samples tested after unrestricted shrink at 200°C for three minutes. MILSTD202, Method 215K for three cycles of three-minute immersions in specified fluids followed by toothbrush rub after each immersion. Print still easily legible on sleeves printed with all ribbons in all three test fluids.
Weatherability
Tested using ASTM G155 Cycle 1 for 1000 hours in Xenon Arc Weatherometer. There was no visible change to the printing.
Flammability
Self-extinguishing within 60 seconds.
Regulatory and agency approvals:
UL Recognized to UL224 Extruded Insulated Tubing.
RoHS compliant to RoHS Directive 2002/95/EC.
Meets requirements of a halogen-free material per DIN VDE 0472 part 815.