Labels by Sign and Label Printer
menu
Paint Stripe Floor Marking Stencils
Valve Lockouts & Hose Lockouts
Safety and Facility Signs and Labels Software
Wire and Component Label Software
Product Identification Label Software
Lockout Tagout Procedures and Tags
SmartID Aerospace RFID Solutions
- Confined Space Signs
- Construction Site Signs
- Electrical and Arc Flash Signs
- First Aid Signs
- Forklift and Warehouse Safety Signs
- Lockout Tagout Signs
- Machine Operation Signs
- Maintenance Signs
- Marine and IMO Signs
- Personal Protection (PPE) Signs
- Radiation and Laser Signs
- Safety Awareness and Compliance Signs
- Slip, Trip and Floor Obstacle Hazard Signs
- Blank Pipe Markers
- IIAR Ammonia Pipe Markers and Components
- Pipe Markers for Acids and Bases
- Pipe Markers for Air and Ducts
- Pipe Markers for Fire Systems
- Pipe Markers for Gases
- Pipe Markers for Maintenance and Operation
- Pipe Markers for Oil
- Pipe Markers for Other Liquids
- Pipe Markers for Steam
- Pipe Markers for Water
Pipe Marker Accessories & Mounting Brackets
Maintenance and Production Tags
Aerospace, Defense and Mass Transit
Datacom , Telecom Identification
BBP12 Firmware Upgrade V2.06
Firmware Upgrade Steps
Note: In order to upgrade the firmware of your BBP12 you will need access to a PC and the Diagnostic Tool which can be obtained via Knowledge Base 7390.
1.) Download the BBP12_A_2_0_6_Upgrade.zip to your PC and extract the zip file.
2.) Open the Diagnostic Tool with the printer connected via USB (the printer driver must also be installed and functioning)
3.) Select the "Command Tool" tab
4.) Select "Send File" on the lower left
5.) Navigate to the location of the extracted firmware in step 1 and select the file named "BBP12_VA2.06_EZD.NEW"
6.) Click "Send" on the lower left to upgrade the firmware
7.) The display on the printer will show the progress of the update.
8.) Once completed close the diagnostics tool.
Begin Download
Note: In order to upgrade the firmware of your BBP12 you will need access to a PC and the Diagnostic Tool which can be obtained via Knowledge Base 7390.
1.) Download the BBP12_A_2_0_6_Upgrade.zip to your PC and extract the zip file.
2.) Open the Diagnostic Tool with the printer connected via USB (the printer driver must also be installed and functioning)
3.) Select the "Command Tool" tab
4.) Select "Send File" on the lower left
5.) Navigate to the location of the extracted firmware in step 1 and select the file named "BBP12_VA2.06_EZD.NEW"
6.) Click "Send" on the lower left to upgrade the firmware
7.) The display on the printer will show the progress of the update.
8.) Once completed close the diagnostics tool.
